No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/UPSTRMNBR_ERR

PIM/4/UPSTRMNBR_ERR

Message

PIM/4/UPSTRMNBR_ERR:In VPN instance "[vpn-instance-name]", in the PIM-SSM module, the upstream neighbor could not be found though the upstream ([source-address], [group-address]) was in Joined state.

Description

An (S, G) Join message was sent to the upstream direction, but no upstream neighbor was found on a PIM-SSM network.

Parameters

Parameter Name Parameter Meaning
[vpn-instance-name] Indicates the name of a VPN instance.
[source-address] Indicates a multicast source address.
[group-address] Indicates a multicast group address.

Possible Causes

The unicast routing information used to implement multicast routing was incomplete or incorrect.

Procedure

  1. Check whether the unicast routing information is complete and correct.

    If the unicast routing information is complete and correct, go to Step 2.

    If the unicast routing information is incomplete or incorrect, check unicast routing configurations.

  2. Check whether PIM is enabled on the interfaces that connect the local and peer devices.

    If PIM is enabled on both the interfaces, go to Step 3.

    If PIM is not enabled on any of the interfaces, enable PIM.

  3. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 133265

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next