No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NTP/4/NTP_STRATUM_CHANGE:System stratum changes from [stratum1] to [stratum2] after clock update.


The stratum of the system clock changed after the clock is updated.


Parameter Name Parameter Meaning
[stratum1] Indicates the stratum of the system clock before update.
[stratum2] Indicates the stratum of the system clock after update.

Possible Causes

  • The system has just selected the source reference clock.

  • The switchover of source reference clock is performed during clock synchronization.


  • This log message indicates a normal situation, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 170032

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next