Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FCOE/4/FCOE_NPVVLAN_NOTEQUAL_VNPVLAN
Message
FCOE/4/FCOE_NPVVLAN_NOTEQUAL_VNPVLAN: The configured NPV VLAN is different from the FCF VLAN discovered by the VN_Port. (instance name= [instanceName], NPV_VLAN=[npvVlan], FCF_VLAN=[fcfVlan])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
instanceName |
Name of the instance. |
npvVlan |
FCoE VLAN ID of the NPV instance. |
fcfVlan |
FCoE VLAN ID of the FCF. |
Possible Causes
The NPV VLAN of the NPV instance is different from the FCF VLAN that the VN_Port discovers.
Procedure
- Run the display fcoe port instance fc-instance-name command to check whether the NPV VLAN of the NPV instance is the
same as the FCF VLAN that the VN_Port discovers.
If so, go to step 3.
If not, go to step 2.
- Run the npv-vlan vlan-id command to reconfigure the NPV VLAN to be the same as the FCF VLAN. Go to step 4.
- Collect alarms, logs, and configurations, and contact technical support personnel.
- End.
Previous
