No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/4/CONFLICT_ROUTERID_INTRA: Router IDs conflict in an intra area. (ProcessId=[ProcessId], AreaId=[AreaId], SelfIfnetIndex=[SelfIfnetIndex], NbrIpAddr=[NbrIpAddr], RouterId=[RouterId], NbrRtrId=[NbrRtrId])


A router ID conflict was detected in an OSPF area.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of a process.
AreaId Indicates the ID of an area.
SelfIfnetIndex Indicates interface index.
NbrIpAddr Indicates IP addeess of neighbor.
RouterId Indicates the router ID of a device.
NbrRtrId Indicates the ID of a device.

Possible Causes

At least two indirectly devices were configured with the same router ID, causing device LSAs to be constantly refreshed. As a result, route flapping occurs.


  1. Modify the router IDs of the devices to ensure that each device in the area has a unique router ID.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 178788

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next