No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CONFIGURATION/6/NETCONF_CONFIG_CHANGE_EVENT: The configuration changed. (Internal change =[isInner], User name =[username], Session ID =[ssnId], Command source address =[srcAddress], Storage type =[datastoreType])


The configuration changed.


Parameter Name Parameter Meaning

Internal change

Internal change or not.

  • 0: not an internal change
  • 1: internal change

User name

User name for initiating a configuration change.

Session ID

Session ID for initiating a configuration change.

Command source address

Source address for initiating a configuration change.

Storage type

Storage DB type for initiating a configuration change:
  • 1: RDB change.
  • 2: CDB change.

  • 3. Startup configuration file change.

Possible Causes

The running configuration or configuration file used for the next startup was changed by a user or in the system.


  1. This log message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 170025

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next