No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



STACKMNG/4/STACK_CONFIG_DIFFERENT: The stack configuration is inconsistent. (hwStackId=[hwStackId], hwStackReason=[hwStackReason], hwStackIdIndex=[hwStackIdIndex])


The current stack configuration is inconsistent with the stack configuration for next startup.


Parameter Name Parameter Meaning


Stack member ID.


Alarm cause.


ID index of the stack member.

Possible Causes

1: The offline configuration of a newly added device exists on the master switch, is inconsistent with the current configuration, and is used as the configuration for next startup.

2: The stack configuration is manually modified to be inconsistent with the stack configuration for next startup.


  1. Run the display stack configuration command to check whether the current stack configuration is consistent with the stack configuration for next startup. If not, manually modify the stack configuration.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 177239

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next