No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM/4/hwAllocatedIpLimitReachAlarm_clear

AM/4/hwAllocatedIpLimitReachAlarm_clear

Message

AM/4/hwAllocatedIpLimitReachAlarm_clear:The number of allocated IP addresses was under the limit.(LimitResumeValue=[LimitValue])

Description

The number of assigned IPv6 addresses fell below the limit.

Parameters

Parameter Name Parameter Meaning

LimitResumeValue

Number of assignable IPv6 addresses for clearing an alarm

Possible Causes

After IPv6 addresses in the address pool were reclaimed, the number of assigned addresses fell below the limit.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 126250

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next