No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RADIUS/4/RDS_ALLOCSEED_FAIL

RADIUS/4/RDS_ALLOCSEED_FAIL

Message

RADIUS/4/RDS_ALLOCSEED_FAIL:NAS failed to allocate identifier for packet. (Server IP=[ServerIpAddress], Port=[Port], VPN_ID=[VpnId])

Description

NAS failed to allocate identifier for the packet.

Parameters

Parameter Name Parameter Meaning

Server IP

IP address of server.

Port

Port number of the server.

VPN_ID

VPN ID or the VRF index.

Possible Causes

The pending limit for a global server reached maximum. It could be due to the following reason:
  • Heavy traffic on the server
  • Server is DOWN

Procedure

  • Run ping command to check the server status and retry to start the RADIUS server if the server is DOWN.
  • Wait for some time if the server is not free due to heavy traffic.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 118987

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next