No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QOS/3/QOS_APPLY_ERROR_ON_SLOT

QOS/3/QOS_APPLY_ERROR_ON_SLOT

Message

QOS/3/QOS_APPLY_ERROR_ON_SLOT: QoS configuration is failed to apply on this board.(Command = [Name], SlotIdStr = [SlotIdStr], Reason = [Reason])

Description

The QoS configuration fails to be applied in the slot.

Parameters

Parameter Name Parameter Meaning

Command

Indicates the configuration name.

SlotIdStr

Specifies the slot ID.

Reason

Indicates the cause for a failure to apply the QoS configuration.

Possible Causes

  • The card does not support the QoS service.
  • The resources required by the QoS service on the card have been exhausted.

Procedure

  • Configure the QoS service on the supported card.
  • Adjust system hardware resources such as ACLs.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 136176

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next