Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SMLKTRAP/4/hwSmartLinkInactiveLinkFail_active
SMLKTRAP/4/hwSmartLinkInactiveLinkFail_active
Message
SMLKTRAP/4/hwSmartLinkInactiveLinkFail_active: [LinkStatus] link port [IfIndex] of smart link group [SmlkGrpID] was abnormal.
Description
A member interface in a Smart Link group was faulty.
Parameters
Parameter Name
Parameter Meaning
LinkStatus
Indicates the status of a link.
IfIndex
Indicates the index of an interface.
SmlkGrpID
Indicates the ID of a Smart Link group that an interface belongs.
Possible Causes
Cause: The inactive interface is down.
Procedure
The inactive interface is down.
Run the display interface brief command to check the physical status of the inactive interface.
Check whether the cable of the inactive link is correctly connected.
If the inactive interface is Up, and the cable is correctly connected, go to Step 3.
If the inactive interface goes Down, and the undo shutdown command does not set the interface to Up, go to Step 3.
Collect trap, log, and configuration information, and contact technical support personnel.
Previous
