Rate and give feedback
:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CONFIGURATION/4/B2S_BACKUP_FAILED
Message
CONFIGURATION/4/B2S_BACKUP_FAILED: Failed to transfer the configuration file to server [server-ip] through [transport-type] when automatically backing up the configuration.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
server-ip |
Server ip address. |
transport-type |
Transfer protocol type. |
Possible Causes
1: The server is unreachable.
2: The user name does not exist or the password is incorrect.
3: The server patch does not exit.
4: The transmission process due to network reasons, the server unreachable and so on.
Procedure
- According
to the reasons for the detection of the connection with the server:
- 1: Run command ping to detect the connection of the server, be sure the server is reachable.
- 2: Ensure that the user name and password are correct.
- 3: Please re-configure the corresponding parameters if the configuration is wrong.
- 4: A single transmission failure can not deal with, and may be related to the state of the network.
- Collect log information and configuration information, and then contact technical support personnel.
Previous
