Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2VPN/2/hwVplsVcDown_clear
Message
L2VPN/2/hwVplsVcDown_clear:The status of the VPLS VC turned UP. (VsiName=[STRING], PwId=[GAUGE], RemoteIp=[IPADDR], PwType=[INTEGER], HWL2VpnStateChangeReason=[INTEGER], SysUpTime=[TIMETICK], TunnelPolicyName=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| VsiName | Indicates the name of a VSI. |
| PwId | Indicates the ID of a PW. |
| RemoteIp | Indicates the IP address of the remote peer. |
| PwType | Indicates the type of a PW:
|
| HWL2VpnStateChangeReason | Indicates the cause of the VC status change. |
| SysUpTime | Indicates the time for system startup. |
| TunnelPolicyName | Indicates the name of a tunnel policy. |
Possible Causes
Cause 2: VC was created.
Cause 5: LDP session was Up.
Cause 11: New LDP mapping message was received.
Cause 18: Interface was Up.
Cause 23: Tunnel was Up.
Cause 30: LDP notification message was forwarded.
Cause 38: Local AC fault was resumed.
Cause 42: Local PSN fault was resumed.
Cause 59: MTU Matched.
Cause 62: VSI was resumed.
Cause 63: Set Admin VSI.
Previous
