No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DAD/4/hwDadPortProtocolAlarm_clear

DAD/4/hwDadPortProtocolAlarm_clear

Message

DAD/4/hwDadPortProtocolAlarm_clear:The protocol status of the dual-active port change to up, or the dual-active port does not exist. (hwDadDetectPort=[hwDadDetectPort])

Description

The protocol status of the dual-active detection (DAD) port goes Up, or the DAD configuration is removed from the port.

Parameters

Parameter Name Parameter Meaning

hwDadDetectPort

Indicates the DAD port.

Possible Causes

The protocol status of the DAD port goes Up, or the DAD configuration is removed from the port.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 119437

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next