No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/IS_FREQUENT_CALCULATE_DELAY

ISIS/6/IS_FREQUENT_CALCULATE_DELAY

Message

ISIS/6/IS_FREQUENT_CALCULATE_DELAY:ISIS-INFO: The statistics about LSP update, calculation, and flooding suppression times were recorded. (InstanceId =[InstanceId], Level =[Level], SuppressLSPstoGenerateCount=[generationLSPCount], SuppressLSPstoCalculateCount=[processLSPCount], SuppressLSPstoFloodCount=[floodLSPCount], LogPeriod = [time] )

Description

The number of times that LSP updates and flooding and LSP-triggered route calculations were delayed were recorded.

Parameters

Parameter Name Parameter Meaning

InstanceId

ID of an IS-IS process

Level

IS-IS Level

SuppressLSPstoGenerateCount

Number of times that LSP updates are delayed

SuppressLSPstoCalculateCount

Number of times that LSP-triggered route calculations are delayed

SuppressLSPstoFloodCount

Number of times that LSP flooding is delayed

LogPeriod

Interval at which logs are generated

Possible Causes

Timers were set in the system view to delay LSP updates and flooding and LSP-triggered route calculations.

Procedure

  1. Check whether any of the following inequalities is met:

    SuppressLSPstoGenerateCount > Number of local LSPs x 1800

    SuppressLSPstoCalculateCount > Number of LSPs in the LSDB x 1800

    SuppressLSPstoFloodCount > Number of LSPs in the LSDB x 1800

    • If any of the preceding inequalities is met, go to Step 2.

    • If none of the preceding inequalities is met, go to Step 3.

  2. Reduce the corresponding timer and check whether the problem is resolved.

    • If the problem is resolved, go to Step 3.

    • If the problem persists, go to Step 4.

  3. Contact technical support personnel technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 114292

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next