No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SNMP/4/SNMP_IPUNLOCKSTAT:In the last 5 minutes, [ULONG] IP addresses were unlocked. (IPList=[STRING])


IP addresses that had been unlocked in the last 5 minutes were recorded in combined mode.


Parameter Name Parameter Meaning
[ULONG] Number of unlocked IP addresses.
IP List List of unlocked IP addresses. If one log cannot display all the unlocked IP addresses, the IP addresses are displayed in multiple logs.

Possible Causes

If there are already three unlocked IP addresses, the system does not separately generate any new unlocking log for each newly unlocked IP address. Instead, the system combines unlocking logs every 5 minutes and records the IP addresses unlocked within the 5-minute period.


  1. Check whether community names or user names and passwords of the SNMPv3 user with the source IP address are correct.
  2. Check whether the source IP address in the IP address list is valid.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 170843

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next