No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NTP/4/NTP_LEAP_CHANGE

NTP/4/NTP_LEAP_CHANGE

Message

NTP/4/NTP_LEAP_CHANGE:System leap changes from [leap1] to [leap2] after clock update.

Description

The leap second of the system changed after the system clock is updated.

Parameters

Parameter Name Parameter Meaning
[leap1] Indicates the leap second of the system before clock update.
[leap2] Indicates the leap second of the system after clock update.

Possible Causes

  • The system has just selected the source reference clock.

  • The switchover of source reference clocks is performed during clock synchronization.

Procedure

  • This log message indicates a normal situation, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 122799

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next