Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM/2/hwPublicIpv6PrefixExceed_clear
Message
RM/2/hwPublicIpv6PrefixExceed_clear:The number of public IPv6 prefixes falls below the maximum value. (PrefixCount=[hwCurIpv6PrefixNum], MaxValue=[hwIpv6PrefixLimitValue])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
PrefixCount |
Indicates the number of IPv6 public route prefixes in the routing table. |
MaxValue |
Indicates the maximum number of IPv6 public route prefixes supported by the device. |
Possible Causes
Cause 1:
The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.
Cause 2:
The maximum number of IPv6 public route prefixes supported by the system was increased or the limit on the number of IPv6 public route prefixes was deleted.
Previous
