Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STACKMNG/4/STACK_MEMBER_LEAVE
Message
STACKMNG/4/STACK_MEMBER_LEAVE: The stack member device left. (hwStackIdIndex=[hwStackIdIndex], hwStackId=[hwStackId], hwStackMacAddress=[hwStackMacAddress])
Parameters
Parameter Name | Parameter Meaning |
---|---|
hwStackIdIndex | ID index of the stack member. |
hwStackId | ID of the stack member. |
hwStackMacAddress | MAC address of the device. |
Procedure
- Check whether the member device is deleted manually from
the stack system.
If so, no action is required.
If no, go to step 2.
- Run the display
interface brief command to check whether the stack interface
is Down.
- If so, rectify the fault.
- If no, go to step 3.
- Run the display stack configuration command to check whether the
stack configuration complies with the requirement.
- If so, go to step 4.
- If no, modify the stack configuration.
- Collect trap messages, log messages, and configurations, and then contact technical support personnel.