No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



EFM/3/DYINGGASP:Remote DyingGasp Event occurred. (IfIndex=[IfIndex], RemoteMacAddress=[RemoteMacAddress], IfName=[IfName])


An unrecoverable event occurs, for example, the system or a board restarts, or the device is powered off.


Parameter Name Parameter Meaning
IfIndex Interface index of the peer device received by the local device
RemoteMacAddress MAC address of the remote device
IfName Interface name of the peer device received by the local device

Possible Causes

Cause 1:

The remote device restarts.

Cause 2:

The board on the remote device restarts.

Cause 3:

The remote device is powered off.


  1. After the remote device or the board on the remote device restarts, run the display efm session command to check the EFM status.

    • If yes, go to Step 3.
    • If no, go to Step 2.

  2. Collect configuration, trap messages, and log messages, and then contact technical support personnel.
  3. End.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 176901

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next