Log Reference

OID

Indicates the ID of the MIB object.

Index

Indicates the index of the BFD session.

ConfigurationName

Indicates the configuration name of the BFD session.

PeerIp

Indicates the bound destination IP address.

BindIfIndex

Indicates the index of the bound interface.

BindIfName

Indicates the name of the bound interface.

Diagnosis

Indicates information about session diagnostic characters.

BindVrfIndex

Indicates the index of the bound VPN.

BindVpnName

Indicates the name of the bound VPN.

SessionType

Indicates the type of the BFD session.

• 1: Static, indicates the statically configured BFD session.

• 2: Dynamic, indicates the dynamic and statically self-negotiated BFD sessions.

• 3: Entire_Dynamic, indicates that the establishment of a BFD session is triggered entirely dynamically. This type of BFD session is created only after the function of passively creating BFD sessions is enabled on the egress router of the LSP.

• 4: Static_Auto, indicates the static BFD session that is established with automatically negotiated discriminators.

DefaultIp

Indicates the default multicast IP address.

BindType

Indicates the binding type.

• 2 or 3: Peer Ip Address, detects the multi-hop IP link.

• 1 or 4: Interface, detects the single-hop IP link.

• 9: LDP_LSP, detects the LDP LSP.

• 11: TE_LSP, detects the LSP bound to the TE tunnel.

• 12: TE_TUNNEL, detects the TE tunnel.

• 13: PW, detects the PW.

• 15: VSI_PW, detects the VSI PW.

StaticLspName

Indicates the name of the static LSP.

PwSecondary

Indicates the ID of the secondary PW.

NextHop

Indicates the IP address of the next hop.

VcId

Indicates the ID of the VC.

VsiName

Indicates the name of the VSI.

VsiPeerAddress

Indicates the destination address of the VSI.

DiscrAuto

Indicates the static auto-negotiation identifier.

PeerIpv6

Indicates the bound destination IPv6 address.

Ipv6NextHop

Indicates the next-hop IPv6 address.