No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SYSTEM/4/SYS_RELOAD_ACTION

SYSTEM/4/SYS_RELOAD_ACTION

Message

SYSTEM/4/SYS_RELOAD_ACTION: The board was reboot. (ReloadIndex=[ReloadIndex], ReloadImage=[ReloadImage], ReloadCfg=[ReloadCfg], ReloadReason=[ReloadReason], ReloadTime=[ReloadTime], ReloadAction=[ReloadAction], ReloadPaf=[ReloadPaf], ReloadLicense=[ReloadLicense], ReloadPatch=[ReloadPatch]).

Description

The device was reset.

Parameters

Parameter Name Parameter Meaning

ReloadIndex

Indicates the index of the reset device.

ReloadImage

Indicates the index of the image file loaded for the next startup.

ReloadCfg

Indicates the index of the cfg file loaded for the next startup.

ReloadReason Indicates the cause of the reset. For example, the device is reset before a cold patch takes effect.
ReloadTime Indicates the time when the device is reset. For example, # 0x07 0xDB 0x01 0x03 0x08 0x32 0x01 0x01 indicates 2011-1-3, 8:50:1.1.
ReloadAction Indicates the value of the reset action.
ReloadPaf Indicates the index of the PAF file loaded for the next startup.
ReloadLicense Indicates the index of the license file loaded for the next startup.
ReloadPatch Indicates the index of the patch file loaded for the next startup.

Possible Causes

The device was reset.

Procedure

  1. Run the display device command to check the status of the device.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 124081

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next