No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
MENU
Support Documentation

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEVM/1/hwPowerRemove_active

DEVM/1/hwPowerRemove_active

Message

DEVM/1/hwPowerRemove_active: The power module was removed.(EntPhysicalIndex=[EntPhysicalIndex], EntPhysicalName=[EntPhysicalName], EntityTrapFaultID=[EntityTrapFaultID], Reason=[Reason])

Description

A power module was removed.

Parameters

Parameter Name Parameter Meaning
EntPhysicalIndex Indicates the entity index.
EntPhysicalName Indicates the entity name.
EntityTrapFaultID Indicates the error code: 136448.
Reason Indicates a possible cause.

Possible Causes

A power module was removed.

Procedure

  1. Check whether a power module exists. If not, insert a power module.
  2. If so, verify that the power module is installed properly.
  3. If the fault persists, replace the power module.
Translation
简体中文
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 119141

Downloads: 89

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next
Enterprise APP

Copyright © 2019 Huawei Technologies Co., Ltd. All rights reserved.