No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
GRESM/6/SMTH_SEQ_ERR

GRESM/6/SMTH_SEQ_ERR

Message

GRESM/6/SMTH_SEQ_ERR:Data smooth is performed when messages of inconsecutive sequence numbers are sent. (MsgType=[MsgType], CurSeqNo=[CurSeqNo], RecvSeqNo=[RecvSeqNo], CompType=[CompType], CompPid=[CompPid])

Description

The sequence numbers of messages were not consecutive, and as a result message smoothing restarted.

Parameters

Parameter Name Parameter Meaning
MsgType Indicates the type of the message.
CurSeqNo Indicates the current sequence number.
RecvSeqNo Indicates the received sequence number.
CompType Indicates the type of the component.
CompPid Indicates the PID of the component.

Possible Causes

Some messages were lost. Consequently, the sequence numbers of received messages were not consecutive.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 114830

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next