No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV2COMM/6/OSPF_INTF_STATE_CHANGE
OSPFV2COMM/6/OSPF_INTF_STATE_CHANGE
Message
OSPFV2COMM/6/OSPF_INTF_STATE_CHANGE: Interface [IfName]
state changed from [OldState] to [NewState]. (Event=[IfEvent], ProcessId=[ProcessId], AreaId=[AreaId])
Description
OSPF interface state changed.
Parameters
Parameter Name
Parameter Meaning
[IfName]
Indicates the interface name.
[OldState]
Indicates the previous interface state, including:
Down
Loopback
Waiting
Point-to-point
DR Other
Backup
DR
[NewState]
Indicates the current interface state, including:
Down
Loopback
Waiting
Point-to-point
DR Other
Backup
DR
Event
Indicates the interface event, including:
InterfaceUp
WaitTimer
BackupSeen
NeighborChange
LoopInd
UnloopInd
InterfaceDown
ProcessId
Indicates the process ID.
AreaId
Indicates the ID of the OSPF area.
Possible Causes
Reason 1: Interface state changed.
Procedure
This log message is informational only, and no action is
required.