No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



FTPS/5/FTPS_RENAME_CMD: The [command] command is executed on the client side.(FromFileName=[FromFileName], ToFileName=[ToFileName], UserName=[UserName], IPAddress=[IPAddress], VPNInstanceName=[VPNInstanceName], ClientDataPort=[ClientDataPort], Result=[Result].)


Renaming succeeded or failed after the rename command was run on the FTP client.


Parameter Name Parameter Meaning
[command] Indicates the command name.
FromFileName Indicates the Original file name.
ToFileName Indicates the New file name.
UserName Indicates the User name of the client.
IPAddress Indicates the IP address of the client.
VPNInstanceName Indicates the name of the VPN instance.
ClientDataPort Indicates the Data port of the client.
Result Indicates the result of the renamed on FTP server.

Possible Causes

The rename command was run on the FTP client.


  • This log message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 171084

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next