No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ERROR-DOWN/4/hwErrordown_clear

ERROR-DOWN/4/hwErrordown_clear

Message

ERROR-DOWN/4/hwErrordown_clear: Error-down recovered. (Ifindex=[INTEGER], Ifname=[STRING], Cause=[STRING], RecoverType=[STRING])

Description

The Error-Down fault recovered.

Parameters

Parameter Name Parameter Meaning

Ifindex

Index of an interface

Ifname

Interface name

Cause

Cause of an Error-Down

RecoverType

Recovery type: automatic recovery or recovery using the command undo shutdown and restart(interface view).

Possible Causes

  1. auto-defend, manual recovery

  2. auto-defend, auto recovery

  3. bpdu-protection, manual recovery

  4. bpdu-protection, auto recovery

  5. crc-statistics, manual recovery

  6. crc-statistics, auto recovery

  7. dual-active, manual recovery
  8. dual-active, auto recovery
  9. forward-engine-buffer-failed, manual recovery

  10. forward-engine-buffer-failed, auto recovery

  11. forward-engine-interface-failed, manual recovery

  12. forward-engine-interface-failed, auto recovery

  13. link-flap, manual recovery

  14. link-flap, auto recovery

  15. loopback-detect, manual recovery

  16. loopback-detect, auto recovery

  17. m-lag, auto recovery

  18. m-lag-consistency-check, auto recovery

  19. mac-address-flapping, manual recovery

  20. mac-address-flapping, auto recovery

  21. portsec-reachedlimit, manual recovery

  22. portsec-reachedlimit, auto recovery

  23. spine-member-exceed-limit, manual recovery
  24. spine-member-exceed-limit, auto recovery
  25. spine-type-unsupported, manual recovery
  26. spine-type-unsupported, auto recovery
  27. stack-config-conflict, manual recovery
  28. stack-config-conflict, auto recovery
  29. stack-member-exceed-limit, manual recovery
  30. stack-member-exceed-limit, auto recovery
  31. stack-packet-defensive, manual recovery
  32. storm-control, manual recovery

  33. storm-control, auto recovery

  34. transceiver-power-low, manual recovery

  35. transceiver-power-low, auto recovery

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 114527

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next