No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/4/TRAP_VIF_AUTH_FAIL: Virtual interface authentication has failed. (VirtIfAreaId=[VirtIfAreaId], VirtIfNeighbor=[VirtIfNeighbor], ProcessId=[ProcessId], RouterId=[RouterId], ConfigErrorType=[ConfigErrorType], PacketType=[PacketType], InstanceName=[InstanceName])


The virtual interface authentication failed.


Parameter Name Parameter Meaning
VirtIfAreaId Indicates the ID of a transit area.
VirtIfNeighbor Indicates the IP address of a neighbor.
ProcessId Indicates the ID of an OSPF process.
RouterId Indicates the ID of a router.
ConfigErrorType Indicates the error type.
PacketType Indicates the packet type.
InstanceName Indicates the VPN name.

Possible Causes

The virtual interface authentication failed.


  1. Run the display ospf interface command to check the authentication configuration of the virtual interface and the neighbor router.
  2. Contact the Huawei technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 121590

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next