Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L3VPN/2/hwL3vpnIpv6RouteExceed_clear
L3VPN/2/hwL3vpnIpv6RouteExceed_clear
Message
L3VPN/2/hwL3vpnIpv6RouteExceed_clear: The number
of IPv6 routes in the VPN instance fell below the maximum number.
(VPN instance name=[], number of existing routes=[], maximum value=[])
Description
The number of IPv6 routes in the VPN instance fell
below the maximum number that is allowed.
Parameters
Parameter Name
Parameter Meaning
VpnName
Name of the VPN instance
Current
Number of IPv6 routes in the current VPN instance
Max
Maximum number of IPv6 routes allowable in a
VPN instance
Possible Causes
Cause: The number of IPv6 routes in the VPN instance
exceeded the limit on the maximum number of routes allowable in the
address family of the VPN instance, which was set using the routing-table limit command. Then the number of
IPv6 routes fell below the upper threshold.
Procedure
This alarm message is informational only, and no action
is required.