No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/BAD_LSA

OSPF/6/BAD_LSA

Message

OSPF/6/BAD_LSA: OSPF Received bad LSA. (ErrorType=[ErrType], ErrorInformation=[ErrInfo], ProcessId=[ProcessId], InterfaceName=[IfName], LsaType=[LsaType], AdvertisingRouter=[AdvRtr], LinkStateId=[LSID], Count=[Counter], AreaId=[AreaId])

Description

The first incorrect LSA was received within 15 minutes. Each packet error type has a specific suppression measure, and suppression measures do not affect each other.

Parameters

Parameter Name Parameter Meaning
ErrorType Packet error type
ErrorInformation Key packet error information
ProcessId Process ID
InterfaceName Interface name
LsaType LSA type
AdvertisingRouter LSA advertising router
LinkStateId Link state ID
Count Number of error packets (The number is reset after being displayed. This means that the number of incorrect packets displayed in the log only indicates the number of incorrect packets generated since the last time the number of incorrect packets was displayed.)
AreaId Area ID

Possible Causes

This log is displayed if the device receives an incorrect LSA (for example, the checksum of the LSA is incorrect). Incorrect LSAs of the same type are suppressed for 15 minutes.

Procedure

  1. Check the device that sends the incorrect LSAs.
  2. Contact technical support personnel technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 121940

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next