Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IGMP/4/QUERY_INTERVAL_NOT_CONISITENT_MGMD_VSI
Message
IGMP/4/QUERY_INTERVAL_NOT_CONISITENT_MGMD_VSI:The interval of [protocol] general query packet received is greater than that of current configuration. (VsiName=[VsiName], IfName =[IfName], QueryReceInterval=[QueryReceInterval], QueryInterval=[QueryInterval])
Description
The interval at which the switch receives IGMP/MLD general query messages is larger than the interval at which the switch sends IGMP/MLD general query messages.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| protocol | Protocol type, IGMP or MLD. |
| VsiName | VSI name. |
| IfName | Name of the interface using which the switch receives IGMP/MLD general query messages. |
| QueryReceInterval | Interval at which the switch receives IGMP/MLD general query messages. |
| QueryInterval | Interval at which the switch sends IGMP/MLD general query messages. |
Possible Causes
The interval at which the switch receives IGMP/MLD general query messages is larger than the interval at which the switch sends IGMP/MLD general query messages.
Procedure
- Check whether the interval at which the switch receives IGMP/MLD general query messages is larger than the interval
at which the switch sends IGMP/MLD general query messages.
- If the IGMP/MLD general query message receiving interval is larger, go to Step 2.
- If the IGMP/MLD general query message receiving interval is not larger, go to Step 3.
- Set a same value for the General Query message receiving and sending intervals.
- Collect log information and configuration information, and then contact technical support personnel.
Previous
