No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/4/HELPER_EXIT_RECV_LSA

OSPF/4/HELPER_EXIT_RECV_LSA

Message

OSPF/4/HELPER_EXIT_RECV_LSA: OSPF exit the helper mode because flooding received changed LSA. (ProcessId=[ProcessId], InterfaceName=[InterfaceName], NbrIpAddr=[NbrIpAddr], LsaType=[LsaType], AdvertisingRouter=[AdvertisingRouter], LinkId=[LinkId], AreaId=[AreaId])

Description

The OSPF process exited from the helper mode after receiving changed LSAs.

Parameters

Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
InterfaceName Indicates the name of an interface.
NbrIpAddr Indicates the IP adress of neighbor.
LsaType Indicates the type of an LSA.
AdvertisingRouter Indicates the advertising router.
LinkId Indicates the ID of the link.
AreaId Indicates the ID of the OSPF area.

Possible Causes

The topology changed.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 116281

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next