No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP/6/NOTIFY_SEND

BGP/6/NOTIFY_SEND

Message

BGP/6/NOTIFY_SEND:Sent a NOTIFICATION message to the peer. (Peer=[peer-address], ErrorCode=[error-code], SubErrorCode=[sub-error-code], NotifyInfo=[notify-info], VpnInstance=[VpnInstance], ErrorData=[error-data])

Description

A device sent a NOTIFICATION message to its BGP peer.

Parameters

Parameter Name Parameter Meaning

Peer

IP address of a peer

ErrorCode

Error code carried in a NOTIFICATION message

SubErrorCode

Error sub-code carried in a NOTIFICATION message

NotifyInfo

Error information carried in a NOTIFICATION message

VpnInstance

Name of a VPN instance

ErrorData

Summary of error data contained in a NOTIFICATION message

Possible Causes

  • Cause 1: When detecting an incorrect state, a BGP device sent a NOTIFICATION message containing an error code, an error subcode, and error contents to its peer.
  • Cause 2: The reset bgp command was run to reset the BGP connection.

Procedure

  1. Find out the reason why the BGP peer relationship is interrupted and check whether the reset bgp command is used.

    • If the command is run, wait for the reestablishment of the BGP connection.
    • If the command is not run, go to Step 2.

  2. Collect information based on the error code and error subcode.
  3. Contact technical support personnel technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 122055

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next