BGP/6/NOTIFY_SEND
Message
BGP/6/NOTIFY_SEND:Sent a NOTIFICATION message to the peer. (Peer=[peer-address], ErrorCode=[error-code], SubErrorCode=[sub-error-code], NotifyInfo=[notify-info], VpnInstance=[VpnInstance], ErrorData=[error-data])
Parameters
Parameter Name | Parameter Meaning |
---|---|
Peer |
IP address of a peer |
ErrorCode |
Error code carried in a NOTIFICATION message |
SubErrorCode |
Error sub-code carried in a NOTIFICATION message |
NotifyInfo |
Error information carried in a NOTIFICATION message |
VpnInstance |
Name of a VPN instance |
ErrorData |
Summary of error data contained in a NOTIFICATION message |
Possible Causes
- Cause 1: When detecting an incorrect state, a BGP device sent a NOTIFICATION message containing an error code, an error subcode, and error contents to its peer.
- Cause 2: The reset bgp command was run to reset the BGP connection.
Procedure
- Find out the reason why the BGP peer relationship is interrupted and check whether the reset bgp command is used.
- If the command is run, wait for the reestablishment of the BGP connection.
- If the command is not run, go to Step 2.
- Collect information based on the error code and error subcode.
- Contact technical support personnel technical support personnel.