No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/6/ISIS_PEER_HOLD_MAX_COST_ENTER

ISIS/6/ISIS_PEER_HOLD_MAX_COST_ENTER

Message

ISIS/6/ISIS_PEER_HOLD_MAX_COST_ENTER: ISIS peer on interface [IfName] enter hold maximum cost state.(Level=[Level], Reason=[Reason])

Description

The IS-IS neighbor entered the hold-max-cost state.

Parameters

Parameter Name Parameter Meaning

IfName

Name of an interface.

Level

IS-IS level.

Reason

Reason why the IS-IS neighbor entered the Hold-max-cost state.

Possible Causes

The isis peer hold-max-cost timer timer command was run on the IS-IS interface, and the neighbor encountered a fault and then recovered.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 135091

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next