No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ARP/2/hwEthernetARPMACIPConflict_clear: MAC and IP address conflict resolved. (Conflict interface=[LogicIfName], Conflict MAC address=[ConflictMAC], Conflict IP address=[ConflictIP])


A resume log is generated when the interface cannot receive a packet with source IP and MAC addresses that are the same as those of the interface.


Parameter Name Parameter Meaning

Conflict interface

Name of the conflict interface where the conflict is detected

Conflict MAC address

Source MAC addresses of the received ARP packets

Conflict IP address

Source IP addresses of the received ARP packets

Possible Causes

The interface cannot receive a packet with source IP and MAC addresses that are the same as those of the interface in 30 minutes.


  • This alarm message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169621

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next