No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L3VPN/4/hwL3vpnIpv6RouteThresholdExceed_clear: The number of IPv6 routes in the VPN instance fell below the alarm threshold multiplied by the maximum value. (VPN instance name=[], number of existing routes=[], alarm threshold=[])


The number of IPv6 routes in the VPN instance fell below the middle threshold.


Parameter Name Parameter Meaning


Name of the VPN instance


Number of IPv6 routes in the current VPN instance


Middle threshold

Possible Causes

Cause: The number of IPv6 routes in the VPN instance exceeded the middle threshold for the number of routes allowable in the address family of the VPN instance, which was set using the routing-table limit command. Then the number of IPv6 routes fell below the middle threshold.


  • This alarm message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 177225

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next