No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NQA/4/TEST_COMPLETED

NQA/4/TEST_COMPLETED

Message

NQA/4/TEST_COMPLETED: NQA entry test completed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], HopIndex=[HopIndex], AddressType=[AddressType], Address=[Address], CompletionTimeMin=[CompletionTimeMin], CompletionTimeMax=[CompletionTimeMax], SumCompletionTime=[SumCompletionTime], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], SumCompletionTime2Low=[SumCompletionTime2Low], SumCompletionTime2High=[SumCompletionTime2High], LastGoodProbe=[LastGoodProbe], LastGoodPath=[LastGoodPath])

Description

The test succeeded.

Parameters

Parameter Name Parameter Meaning

OwnerIndex

Administrator of an NQA test instance

TestName

Name of an NQA test instance

TargetAddressType

Destination address type of an NQA test instance

TargetAddress

Destination address of an NQA test instance

OperStatus

Status of an NQA test instance

Index Index of the result table
HopIndex Hop index
AddressType Address type of an NQA test instance
Address Address of an NQA test instance
CompletionTimeMin Minimum RTT value of an NQA test instance
CompletionTimeMax Maximum RTT value of an NQA test instance
SumCompletionTime RTT sum of an NQA test instance.
ProbeResponses Statistics on received packets
SentProbes Statistics on sent packets
SumCompletionTime2Low Sum of RTT squared right 32 bits
SumCompletionTime2High Sum of RTT squared left 32 bits
LastGoodProbe Time when the latest returned packet is received
LastGoodPath Time when the last complete path is obtained

Possible Causes

The test succeeded.

Procedure

  1. This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 124312

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next