No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NQA/4/TEST_COMPLETED: NQA entry test completed. (OwnerIndex=[OwnerIndex], TestName=[TestName], TargetAddressType=[TargetAddressType], TargetAddress=[TargetAddress], OperStatus=[OperStatus], Index=[Index], HopIndex=[HopIndex], AddressType=[AddressType], Address=[Address], CompletionTimeMin=[CompletionTimeMin], CompletionTimeMax=[CompletionTimeMax], SumCompletionTime=[SumCompletionTime], ProbeResponses=[ProbeResponses], SentProbes=[SentProbes], SumCompletionTime2Low=[SumCompletionTime2Low], SumCompletionTime2High=[SumCompletionTime2High], LastGoodProbe=[LastGoodProbe], LastGoodPath=[LastGoodPath])


The test succeeded.


Parameter Name Parameter Meaning


Administrator of an NQA test instance


Name of an NQA test instance


Destination address type of an NQA test instance


Destination address of an NQA test instance


Status of an NQA test instance

Index Index of the result table
HopIndex Hop index
AddressType Address type of an NQA test instance
Address Address of an NQA test instance
CompletionTimeMin Minimum RTT value of an NQA test instance
CompletionTimeMax Maximum RTT value of an NQA test instance
SumCompletionTime RTT sum of an NQA test instance.
ProbeResponses Statistics on received packets
SentProbes Statistics on sent packets
SumCompletionTime2Low Sum of RTT squared right 32 bits
SumCompletionTime2High Sum of RTT squared left 32 bits
LastGoodProbe Time when the latest returned packet is received
LastGoodPath Time when the last complete path is obtained

Possible Causes

The test succeeded.


  1. This trap message is informational only, and no action is required.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 171148

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next