PIM/4/HW_INVALID_JP
Message
PIM/4/HW_INVALID_JP:PIM receives an Invalid Join/Prune message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddrType=[GroupMappingAddrType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddrType=[GroupMappingRPAddrType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvJPAddrType=[InvJPAddrType], InvJPOriginAddr=[InvJPOriginAddr], InvJPGrpAddr=[InvJPGrpAddr], InvJPRpAddr=[InvJPRpAddr], NbrIfIndex=[NbrIfIndex], NbrAddrType=[NbrAddrType], NbrAddr=[NbrAddr], NbrUpTime=[NbrUpTime], NbrName=[NbrName], PimInstanceID=[PimInstanceID], PimInstanceName=[PimInstanceName])
Parameters
Parameter Name | Parameter Meaning |
---|---|
GroupMappingOrigin |
RP type |
GroupMappingAddrType |
Group address type |
GrpAddr |
Group address in the Join/Prune message |
GrpPfxLen |
Mask length of the multicast group address |
GroupMappingRPAddrType |
RP address type |
RPAddr |
RP address |
GroupMappingPimMode |
Current PIM mode |
InvJPAddrType |
Address type of the invalid Join/Prune messages |
InvJPOriginAddr |
Source address of the invalid Join/Prune messages |
InvJPGrpAddr |
Group address of the invalid Join/Prune messages |
InvJPRpAddr |
RP address of the invalid Join/Prune messages |
NbrIfIndex |
Index of the neighboring interface |
NbrAddrType |
Address type of the neighboring interface |
NbrAddr |
Address of the neighboring interface |
NbrUpTime |
Lifetime of the neighbor relationship |
NbrName |
Name of the neighboring interface |
PimInstanceID |
VPN instance ID |
PimInstanceName |
VPN instance name |
Procedure
- Check whether the SSM group address ranges configured on
the local device and the sender of Join/Prune messages are consistent.
- If the SSM group address ranges are consistent, check whether the RP configurations on the local device and the sender of Join/Prune messages are consistent. If not, correct the RP configurations.
- If the SSM group address ranges are inconsistent, run the ssm-policy command to reconfigure the SSM group address ranges.