No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/3/OSPF_SEQ_MIS_RESMOOTH

OSPF/3/OSPF_SEQ_MIS_RESMOOTH

Message

OSPF/3/OSPF_SEQ_MIS_RESMOOTH: OSPF-INFO:The communication components started transmitting data again from the first piece because of the incorrect sequence number. (CurSeq=[CurSeq], RecvSeq=[RecvSeq], LocalComp=[LocalComp], PeerComp=[PeerComp])

Description

The communication ends re-smoothed data between each other due to mismatch between packet sequence numbers of the two ends.

Parameters

Parameter Name Parameter Meaning

[CurSeq]

Current sequence number

[RecvSeq]

Sequence number of the received packet

[LocalComp]

Name of the local component

[PeerComp]

Name of the peer component

Possible Causes

Messages exchanged between the two communication ends were lost, which caused the mismatch of packet sequence numbers.

Procedure

  • Contact technical support personnel technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 124013

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next