No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM/3/hwMplsResourceThresholdExceed_active

MPLS_LSPM/3/hwMplsResourceThresholdExceed_active

Message

MPLS_LSPM/3/hwMplsResourceThresholdExceed_active: The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[MplsResourceType], hwMplsResourceCurrentCount=[ResourceCurrentCount], hwMplsResourceThreshold=[ResourceThreshold], hwMplsResourceTotalCount=[ResourceTotalCount])

Description

The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.

Parameters

Parameter Name Parameter Meaning

hwMplsResourceType

Type of MPLS resource

hwMplsResourceCurrentCount

Number of available MPLS resources

hwMplsResourceThreshold

Upper alarm threshold for MPLS resource usage

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

Possible Causes

The number of MPLS resources of a specific type reached the upper threshold.

Procedure

  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Check whether hwMplsResourceThreshold is set in a specified range.
    • If the value is within the specified range, go to Step 4.
    • If the value is out of the specified range, go to Step 3.
  3. Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 4.
  4. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 5.
  5. Collect log information and configuration information, and then contact technical support personnel..
  6. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 121684

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next