MPLS_LSPM/3/hwMplsResourceThresholdExceed_active
Message
MPLS_LSPM/3/hwMplsResourceThresholdExceed_active: The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[MplsResourceType], hwMplsResourceCurrentCount=[ResourceCurrentCount], hwMplsResourceThreshold=[ResourceThreshold], hwMplsResourceTotalCount=[ResourceTotalCount])
Description
The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.
Parameters
Parameter Name | Parameter Meaning |
---|---|
hwMplsResourceType |
Type of MPLS resource |
hwMplsResourceCurrentCount |
Number of available MPLS resources |
hwMplsResourceThreshold |
Upper alarm threshold for MPLS resource usage |
hwMplsResourceTotalCount |
Maximum number of MPLS resources supported by a device |
Procedure
- Check the hwMplsResourceType field and obtain the MPLS resource type.
- Check whether hwMplsResourceThreshold is set in a specified range.
- If the value is within the specified range, go to Step 4.
- If the value is out of the specified range, go to Step 3.
- Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 6.
- If the alarm persists, go to Step 4.
- Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
- If the alarm is cleared, go to Step 6.
- If the alarm persists, go to Step 5.
- Collect log information and configuration information, and then contact technical support personnel..
- End.