No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FEI_COMM/4/STORMCTRL_BLOCK

FEI_COMM/4/STORMCTRL_BLOCK

Message

FEI_COMM/4/STORMCTRL_BLOCK:The [ucPacketType] packets are blocked because of storm control. (Rate of packets=[uiCurRate][uiRateType], Threshold=[uiMaxRate][uiRateType], Interface=[ifName])

Description

The specified interface is blocked by storm control.

Parameters

Parameter Name Parameter Meaning

[ucPacketType]

Indicates the packet type.

uiCurRate

Indicates the current rate.

uiMaxRate

Indicates the maximum rate.

uiRateType

Indicates the packet rate unit.
  • pps
  • kbps

ifName

Indicates the interface name.

Possible Causes

The rate of broadcast, multicast, or unknown unicast packets received on an interface has exceeded the threshold, and the action is block.

Procedure

  • When the rate of broadcast, multicast, or unknown unicast packets on an interface is too high, configure storm control.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 115428

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next