No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MACSEC/4/PORTERRSTAT: Statistics about error MACsec data packets received by the current port. (Local Port=[LocalPort], Late Packets=[LatePkts],NotValid Packets=[NotValidPkts], BadTag Packets=[BadTagPkts],NoUsingSA Packets=[NoUsingSAPkts])


The log is generated when port error statistics are collected.


Parameter Name Parameter Meaning


Local port name.


Replay window number of failed packets.

NotValidPkts Integrity check or decryption error.
BadTagPkts English ICV wrong length or sectag head illegal.
NoUsingSAPkts SA received from the receiving sectag is not available.

Possible Causes

Additional count of port error in 5 minutes.


  1. Run the display macsec statistics interface interface-type interface-number command in the interface view to check whether there is an exception in the sending packets of the other side.
  2. Collect the log and configuration information, and contact Huawei technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 177111

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next