No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/2/ospfLsdbOverflow_active

OSPF/2/ospfLsdbOverflow_active

Message

OSPF/2/ospfLsdbOverflow_active: The number of AS-external LSAs in the LSDB of an OSPF process reaches the configured maximum number.(hwOspfv2ProcessIdIndex=[hwOspfv2ProcessIdIndex], hwOspfv2MaxLimit=[hwOspfv2MaxLimit])

Description

The number of external routes in the OSPF LSDB exceeded the maximum number allowed.

Parameters

Parameter Name Parameter Meaning

hwOspfv2ProcessIdIndex

ID of an OSPF process

hwOspfv2MaxLimit

Maximum number of external routes supported by the OSPF LSDB

Possible Causes

The number of external routes in the OSPF LSDB exceeded the maximum number allowed.

Procedure

  1. Run the display ospf brief command. If OSPF is in LSDB overflow status is displayed in the command output, the OSPF LSDB in the current OSPF process is overloaded. If OSPF LSDB is approaching overflow limit is displayed in the command output, the number of external routes in the OSPF LSDB has reached or exceeded 90% of the maximum number.

    • If the OSPF LSDB is overloaded, go to Step 2.

    • If the OSPF LSDB is not overloaded, this trap message is informational only and no action is required.

  2. Perform the following operations as required:

    • If a change in the maximum number is allowed, run the lsdb-overflow-limit number command to increase it.
    • If a change in the maximum number is not allowed, go to Step 3.

  3. contact technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 137224

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next