No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FCOE/4/FCOE_VLAN_ERROR_ALARM
FCOE/4/FCOE_VLAN_ERROR_ALARM
Message
FCOE/4/FCOE_VLAN_ERROR_ALARM: A FIP VLAN notification packet is received on the interface, that the VLAN in the packet is not a FCoE VLAN. (interface name = [IfName], VLAN = [vlanId])
Description
The FCoE VLAN carried in the FIP VLAN notification packets was different from the FCoE VLAN configured on the device.
Parameters
Parameter Name
Parameter Meaning
IfName
Indicates the interface name.
vlanId
Indicates the FCoE VLAN ID.
Possible Causes
Cause 1: The configuration was incorrect.
Cause 2: The FCoE VLAN assigned by FCF was invalid.
Procedure
Cause 1: The configuration was incorrect.
Run the display fcoe vlan [ vlan-id ] command to check whether the FCoE VLAN assigned by FCF was the same as that configured on the local device.
If not, run the vlanvlan-id command in the FC instance view to add the FCoE VLAN to the FC instance.
If so, go to step 2.
Collect traps, logs, and configurations, and contact technical support engineers.
Cause 2: The FCoE VLAN assigned by FCF was invalid.
Collect traps, logs, and configurations, and contact technical support engineers.