No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/HW_INVALID_REG

PIM/4/HW_INVALID_REG

Message

PIM/4/HW_INVALID_REG:PIM receives an invalid register message. (GroupMappingOrigin=[GroupMappingOrigin], GroupMappingAddressType=[GroupMappingAddressType], GrpAddr=[GrpAddr], GrpPfxLen=[GrpPfxLen], GroupMappingRPAddressType=[GroupMappingRPAddressType], RPAddr=[RPAddr], GroupMappingPimMode=[GroupMappingPimMode], InvRegAddressType=[InvRegAddressType], InvRegOriginAddr=[InvRegOriginAddr], InvRegGrpAddr=[InvRegGrpAddr], InvRegRpAddr=[InvRegRpAddr], PimInstanceID=[PimInstanceID], PimInstanceName=[PimInstanceName])

Description

PIM received invalid Register messages.

Parameters

Parameter Name Parameter Meaning

GroupMappingOrigin

RP type

GroupMappingAddressType

Group address type

GrpAddr

Group address of the Registered messages

GrpPfxLen

Mask length of the multicast group address

GroupMappingRPAddressType

RP address type

RPAddr

Address of the RP serving the multicast group

GroupMappingPimMode

Current PIM mode

InvRegAddressType

Address type of the invalid Register messages

InvRegOriginAddr

Source address of the invalid Register messages

InvRegGrpAddr

Group address of the invalid Register messages

InvRegRpAddr

Destination address of the invalid Register messages

PimInstanceID

VPN instance ID

PimInstanceName

VPN instance name

Possible Causes

PIM received invalid Register messages.

Procedure

  • Check whether the SSM group address ranges configured on the source's DR and the RP are consistent.

    • If the SSM group address ranges are consistent, check whether the RP configurations on the source's DR and the local device generating the log are consistent. If not, correct the RP configurations.
    • If the SSM group address ranges are inconsistent, run the ssm-policy command to reconfigure the SSM group address ranges.

Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 115720

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next