No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CLKM/4/hwClockSourceFreqCheck_active: The check of frequence abnormal notification. (hwClockSrcCfgChassisIndex = [hwClockSrcCfgChassisIndex], hwClockSrcCfgSourceTypeIndex = [hwClockSrcCfgSourceTypeIndex], hwClockSrcCfgSourceIndex = [hwClockSrcCfgSourceIndex], hwClockChassisId = [hwClockChassisId], hwClockSrcCfgFreqCheckResult = [hwClockSrcCfgFreqCheckResult], hwClockSrcCfgSourceDescr=[hwClockSrcCfgSourceDescr])


Frequency deviation detection functioned abnormally.


Parameter Name Parameter Meaning

Index of the chassis where the clock source resides. The index is always 1 for a single chassis.


Index of the clock source type:

  • 1: bits(1)
  • 2: ptp(2)
  • 3: interface(3)
hwClockChassisId ID of the chassis where the clock source resides.
hwClockSrcCfgSourceIndex Clock source index.
hwClockSrcCfgFreqCheckResult Frequency deviation detection result.
hwClockSrcCfgSourceDescr Clock source description.

Possible Causes

Signals of the clock source were faulty.


  1. Run the display clock source command to check the current status of the clock source.

    • If the clock source is in abnormal state, frequency deviation detection functions abnormally. Go to step 3.

    • If the clock source is in another state, go to step 2.

  2. Collect alarm information, log information, and configuration of the device, and contact technical support.
  3. End.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 177181

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next