Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
INFO/1/hwLogRecordFailAlarm_active
INFO/1/hwLogRecordFailAlarm_active
Message
INFO/1/hwLogRecordFailAlarm_active: Failed to write
log data into the file. (LogType=[LogType], ReasonDescription=[Reason])
Description
Data failed to be written into a log file.
Parameters
Parameter Name
Parameter Meaning
LogType
Log type
Reason
Reason description
Possible Causes
Cause 1: Data failed to be written into the log file buffer.
Cause 2: The disk space was full.
Cause 3: Disk writing failed.
Procedure
Cause 1: Data failed to be written into the
log file buffer.
Collect log information and configuration information, and then contact technical support personnel.
Cause 2: The disk space was full.
Check whether the disk space is full.
If yes, release some space.
If not, go to Step 2.
Collect log information and configuration information, and then contact technical support personnel.
Cause 3: Disk writing failed.
Check whether the log storage directory is normal.
If yes, go to Step 2.
If not, replace the disk.
Collect log information and configuration information, and then contact technical support personnel.
Previous
