No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/NBR_CHANGE

OSPF/6/NBR_CHANGE

Message

OSPF/6/NBR_CHANGE:Neighbor changes event: neighbor status changed. (ProcessId=[ProcessId], NbrIpAddr=[NbrIpAddr], NbrEvent=[NbrEvent], NbrPreviousState=[NbrPreviousState], NbrCurrentState=[NbrCurrentState])

Description

The event that neighbor status changed was received.

Parameters

Parameter Name Parameter Meaning

[ProcessId]

Process ID

[NbrIpAddr]

IP address of the neighbor

[NbrEvent]

Event that cause neighbor status change:
  • 0: HelloReceived: indicates that a Hello packet is received from the neighbor.
  • 1: Start: indicates that the NBMA interface will send Hello packets to the neighbor at intervals specified by the HelloInterval field.
  • 2: 2WayReceived: indicates that the two ends can communicate with each other.
  • 3: NegotiationDone: indicates that the negotiation between the two ends has been completed.
  • 4: ExchangeDone: indicates that the two ends have exchanged complete DD packets.
  • 5: BadLsReq: indicates that an incorrect LSR is received.
  • 6: LoadingDone: indicates that the two ends have exchanged their databases.
  • 7: AdjOK: indicates whether the local end needs to establish a neighbor relationship with the peer end and maintain the neighbor relationship.
  • 8: SequenceNumberMismatch: indicates that the sequence numbers of DD packets from the neighbor mismatch that from the local end.
  • 9: 1Way: indicates that a 1-way Hello packet is received from the neighbor.
  • 10: KillNbr: indicates that the neighbor is deleted.
  • 11: LLDown: indicates that the lower-layer link between the two ends goes Down.
  • 12: InactivityTimer: indicates that the Hold timer of the neighbor is triggered.

[NbrPreviousState]

Previous neighbor states:
  • 0: Down
  • 1: Init
  • 2: Attempt
  • 3: 2Way
  • 4: ExStart
  • 5: Exchange
  • 6: Loading
  • 7: Full

[NbrCurrentState]

Current neighbor states:
  • 0: Down
  • 1: Init
  • 2: Attempt
  • 3: 2Way
  • 4: ExStart
  • 5: Exchange
  • 6: Loading
  • 7: Full

Possible Causes

Neighbor status changed.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 135856

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next